10-foot long workbench frame cut list (2×4)
A 10-foot long workbench frame cut list (2×4) built from 2 × 4 spf studs, 12 ft stock on 144 in stock needs 8 boards (buy 8), uses 89.3% of each board, and comes to about $86.23 including tax and reserve, as computed by KerfCount's best-fit-decreasing packer (method 2.0.0, reviewed 2026-09-12).
- Boards to buy
- 8
- Material utilization
- 89.3%
- Purchase estimate
- $86.23
- Offcut left over
- 116.75 in
Cut assignments
| Board | Parts | Cut lengths | Remaining offcut |
|---|---|---|---|
| 1 | Long rail, Short rail | 116.5 + 20.5 in | 6.25 in |
| 2 | Long rail, Short rail | 116.5 + 20.5 in | 6.25 in |
| 3 | Long rail, Short rail | 116.5 + 20.5 in | 6.25 in |
| 4 | Long rail, Short rail | 116.5 + 20.5 in | 6.25 in |
| 5 | Lower shelf stretcher, Short rail | 116.5 + 20.5 in | 6.25 in |
| 6 | Lower shelf stretcher, Short rail | 116.5 + 20.5 in | 6.25 in |
| 7 | Leg, Leg, Leg, Leg | 34.5 + 34.5 + 34.5 + 34.5 in | 5 in |
| 8 | Leg, Leg | 34.5 + 34.5 in | 74.25 in |
Shopping list
| Item | Detail | Quantity | Cost |
|---|---|---|---|
| Lumber | 144 in · 2 × 4 SPF studs, 12 ft stock | 8 | $72.00 |
| Tax | 8.875% of lumber only | $6.39 | |
| Delivery | Entered delivery estimate | $0.00 | |
| Reserve | 10% budget allowance, not extra stock | $7.84 |
Assumptions
2 × 4 SPF studs, 12 ft stock on 144 in stock at $9.00 per board, 0.125 in saw kerf, 0.25 in trim per end, 8.875% sales tax, no boards on hand. This is a worked example, not a purchase recommendation; verify your own stock, saw setup, and local prices before buying.