4-foot workbench frame cut list (2×4)
A 4-foot workbench frame cut list (2×4) built from 2 × 4 spf studs on 96 in stock needs 6 boards (buy 6), uses 84.5% of each board, and comes to about $39.52 including tax and reserve, as computed by KerfCount's best-fit-decreasing packer (method 2.0.0, reviewed 2026-09-12).
- Boards to buy
- 6
- Material utilization
- 84.5%
- Purchase estimate
- $39.52
- Offcut left over
- 84.25 in
Cut assignments
| Board | Parts | Cut lengths | Remaining offcut |
|---|---|---|---|
| 1 | Long rail, Long rail | 44.5 + 44.5 in | 6.25 in |
| 2 | Long rail, Long rail | 44.5 + 44.5 in | 6.25 in |
| 3 | Lower shelf stretcher, Lower shelf stretcher | 44.5 + 44.5 in | 6.25 in |
| 4 | Leg, Leg, Short rail | 34.5 + 34.5 + 20.5 in | 5.625 in |
| 5 | Leg, Leg, Short rail | 34.5 + 34.5 + 20.5 in | 5.625 in |
| 6 | Short rail, Short rail | 20.5 + 20.5 in | 54.25 in |
Shopping list
| Item | Detail | Quantity | Cost |
|---|---|---|---|
| Lumber | 96 in · 2 × 4 SPF studs | 6 | $33.00 |
| Tax | 8.875% of lumber only | $2.93 | |
| Delivery | Entered delivery estimate | $0.00 | |
| Reserve | 10% budget allowance, not extra stock | $3.59 |
Assumptions
2 × 4 SPF studs on 96 in stock at $5.50 per board, 0.125 in saw kerf, 0.25 in trim per end, 8.875% sales tax, no boards on hand. This is a worked example, not a purchase recommendation; verify your own stock, saw setup, and local prices before buying.